Supply And Delivery - Hamworthy Purewell VariHeat he Installation, Commisioning And Maintenance Instructions

2.0 SUPPLY AND DELIVERY

Your boiler is despatched to site as a pre-assembled and tested unit. Each boiler is delivered by a tail lift vehicle
and lowered to ground level. It is the installers responsibility to convey the boiler to the plantroom.
Figure 2.1 - Boiler Delivery
The base of each boiler is specially designed to accept a standard pallet truck. This allows the boiler to be
manoeuvred into position without any pallets to remove. Additionally the boiler is designed to pass through a
standard doorway where access is restricted.
NOTE: The boiler is supplied with cardboard corner protection and shrink wrapped for protection during handling.
However, when manoeuvring the boiler, care must be taken to avoid damage to the casing.
The boiler must be kept upright during handling. Care must be exercised to avoid toppling the boiler as this will
result in damage.
The flue connection & condensate trap to the boiler are packaged separately to avoid damage. The flue
components consist of an adaptor elbow, gasket and straight length of 150mm diameter flue pipe. The condensate
trap is supplied loose beneath the front cover.
2
HAMWORTHY HEATING LTD PUREWELL VariHeat he 500001155/F