Using the Belkin Wireless Setup Utility
Using the Belkin Wireless Setup Utility
Important:
A WEP key is a combination of numbers and letters from
A–F and 0–9. For 128-bit WEP, you need to enter 26 characters. For
64-bit WEP, you need to enter 10 keys. This network key needs to
match the key you assign to your wireless router (or access point).
6.
Click "OK", and then "Apply" to save the settings.
Connecting your Computer to a Wireless Router (or Access Point)
that uses WPA-PSK (no server)
1.
Double-click the Signal Indicator icon
"Wireless Network Properties" screen. The "Advanced" button will
allow you to view and configure more options of your Card.
2.
Under the "Wireless Networks Properties" tab, select a network
name from the "Available Networks" list and click "Configure".
The following screen will appear.
to bring up the
24
24