Table of Contents
Advertisement
Using the Belkin Wireless Setup Utility
Using the Belkin Wireless Setup Utility
128-Bit WEP Encryption
1.
Select "128-bit WEP" from the drop-down menu.
2.
After selecting your WEP encryption mode, you can enter your
key manually by typing in the hex key manually, or you can type
in a passphrase in the "Passphrase" field and click "Generate" to
create a key.
A hex (hexadecimal) key is a combination of numbers and letters from
A–F and 0–9. For 128-bit WEP, you need to enter 26 hex characters.
For instance:
C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key
3.
Click "Apply Changes" to finish. Encryption in the Wireless
Router (or Access Point) is now set. Each of the computers on
your wireless network will now need to be configured with the
same security settings.
WARNING:
If you are using a wireless client to turn on the security
settings in your Wireless Router (or Access Point), you will temporarily
lose your wireless connection until you activate security on your
wireless client.
WPA-PSK (no server)
Choose this setting if your network does not use a radius server. WPA-PSK
(no server) is typically used in home and small office networking.
20
20
Advertisement
Table of Contents
