Belkin F5D7000 Supplementary Manual

WI-FI PROTECTED ACCESS (WPA) ADDENDUM (FOR XP USERS)
802.11g Wireless Notebook Network Card (F5D7010)
802.11g Wireless Desktop Network Card (F5D7000)
Overview
WPA is a new standards-based wireless security solution developed by the Wi-Fi Alliance. It also
supports the legacy security standard called WEP (Wired Equivalent Privacy). To use WPA security,
your clients must be upgraded to drivers and software that support WPA. A security patch from
Microsoft called "Windows XP Support Patch for Wireless Protected Access" is available for free
download and works only with Windows XP*. You also need to download the latest driver from
the Belkin website (belkin.com).
Supported Operating Systems:
• Windows® XP Professional
• Windows XP Home Edition
There are two types of WPA security: WPA-PSK (no server) and WPA (with server).
WPA-PSK
uses what is known as a "pre-shared key" as the security key. A pre-shared key is
basically a password that is between eight and 63 characters long. It can be any combination of
letters, numbers, and other characters. Each client uses the same key to access the network.
Typically, this is the mode that will be used in a home environment.
WPA (with server)
automatically. This is typically found in a business environment.
Setting up WPA in Windows XP
In order to use WPA, ensure you are using "Windows wireless network utility" instead of "Belkin
Wireless Utility" by doing the following:
1.
Under Windows XP, click "Start > Control Panel > Network Connections".
2.
Right-click on "Wireless Network Connection", and select "Properties".
3.
Clicking on the "Wireless Networks" tab will display the following screen. Ensure the "Use
Windows to configure my wireless network settings" box is checked.
is a system where a radius server distributes the keys to the clients