Table of Contents
Advertisement
Installing and Setting up the Card
Installing and Setting up the Card
Step 3
Step 3
Let Windows Finish the Installation
Let Windows Finish the Installation
2.5
Remove the metal port cover from
the back of the computer that
corresponds to the PCI slot you
selected. If there is a screw, place
it in a safe place, as you will be
using it to attach the Card to the
computer later.
2.6
Push the Card firmly into the PCI
slot that you have chosen. Apply
pressure as needed until the
connector is fully seated.
2.7
Now secure the Card with the
screw that you previously placed
in a safe place.
2.8
Carefully screw the antenna onto
the threaded connector on the
Card. Turn the antenna until it is
vertical and pointing up.
2.9
Replace the computer's cover.
Now that the Card is installed, you
can reconnect the power cord,
and turn it back on.
3.1
After powering on your computer,
you will see a "Found New
Hardware Wizard" screen. Select
"Install the software automatically
(Recommended)" and click "Next".
Note:
Specific screens differ
depending upon which version of
the Windows OS you are using.
10
10
Advertisement
Table of Contents
