Table of Contents
Advertisement
Using the Belkin Wireless Setup Utility
4. Clicking the "Configure" button will allow you to choose your
network authentication type.
5. For home or small business users, select "WPA-PSK" under
"Network Authentication".
Note: Select WPA if you are using this computer to connect to a
corporate network that supports an authentication server such as a
radius server. Please consult your network administrator for further
information.
6. Select "TKIP" or "AES" under "Data Encryption". This setting will
have to be identical to the wireless router that you set up.
7. Type in your encryption key in the "Network key" box.
Important: Enter your pre-shared key. This can be from eight to 63
characters and can be letters, numbers, or symbols. This same key
must be used on all of the clients that you set up.
8. Click "OK" to apply settings.
29
29
1
2
3
4
5
6
Advertisement
Table of Contents
