Rating Label; Standard Compliance; Figure 1: Safelink Rating Label - ABB SafeLink Installation And Operating Instructions Manual

abb
SLMIO ver 2.12

1.1.3 Rating Label

The rating label is integrated into the main mimic panel. This panel is UV stabilized,
weather resistant polycarbonate. The label information satisfies the requirements of IEC
60298 and includes RMU configuration. The rating label includes a bar-coded serial
No., which matches a similar label used to identify each tank throughout its production.

1.1.4 Standard Compliance

SafeLink has been tested to (and passed) the following standard tests in an ASTA
accredited laboratory:
•
IEC 60298 (1990-12)
A.C. metal-enclosed switchgear and controlgear for rated voltages above 1kV
and up to and including 52kV.
•
IEC 60265-1 (1998-01)
High-voltage switches - Part 1: Switches for rated voltages above 1kV and less
than 52kV.
•
IEC 60420 (1990-10)
High-voltage alternating current switch-fuse combinations.
•
IEC 60129 (1984-01)
Alternating current disconnectors and earthing switches.
•
IEC 60694 (1996-05)
Common specifications for high-voltage switchgear and controlgear standards.
•
IEC 60137 (1995-12)
Insulating bushings for alternating voltages above 1000V.
•
IEC 60529 (1989-11)
Degrees of protection provided by enclosures (IP Code).
ABB Ltd, Switchgear Division, Auckland, New Zealand
SF
Installation and Operating Instructions

Figure 1: SafeLink rating label.

SafeLink
Insulated Ring Main Unit
6
3