Installing/Mounting
4.5 Mounting MAG 1100/1100 HT
● Self-draining installation, minimum incline of 15° to the horizontal plane
Note
3A and EHEDG certification
For the hygenic certifications 3A and EHEDG it is required to mount the sensor either
vertically or with the shown incline of at least 15°
4.5
Mounting MAG 1100/1100 HT
● Install the sensor in rigid pipelines in order to support the weight of the meter.
● Center the connecting pipelines axially in order to avoid turbulent flow profiles.
● Use proper gaskets according to liner type
Remove liner protectors before installing the flow meter
1. Existing pipe
2. Flange
3. Sensor
4. Gaskets
5. Sensor length incl. gaskets
24
SITRANS F M MAG 1100 sensor
Operating Instructions, 01/2018, A5E03433301-AC