Control Setting - Nortec SE Series Installation And Operation Manual

(User Defined Settings Continued)
Time : 13:22
Unit : lb/hr
Language : English
Contrast 10
Leak Ck : Off

Control Setting

Control Setting allow you to set the type of external controls the humidifier is connected to. In
most cases the Nortec SETC humidifier is factory configured to operate with the external
controls that were specified for the site. Press Set while highlighting Control Setting in the
Main Menu.
CAUTION: Improper control configuration can result in over humidifying which can
result in damage to property.
53 | Operation
Time
Hour Hour 13 13
Minute 22
Menu Set
Unit Steam
lb/hr
lb/hr
lb/hr
kg/hr
Menu Set
Language
English
English
English
French
Dutch
German
Menu Set
Contrast
10
10
10
Menu Set
Leak Check
Off
Off Off
On
Menu Set
Time
Sets the time of day. Selecting Hour
or Minute takes the user to a
submenu that allows the value to be
increased or decreased by pressing
u/down arrows. Set accepts the
setting.
Unit
Sets the units of measure to use for
display of steam output to either
lb/hr or kg/hr. (Default = lb/hr)
Language
Sets the language to use for the
software menu. (Default = English)
Contrast
Adjusts the contrast of the LCD
display to improve visibility under
different lighting conditions. (Default
= 10)
Leak check
Sets whether the controller should
monitor tank level during periods of
no demand. If on a fault will be
generated if water level drops with
no demand. (Default = Off)