Honeywell VG.010A Product Handbook page 16

REPLACEMENT OF COIL
:
Remove setting knob (1)
:
Unscrew cap (2) with suitable
wrench and remove it from the coil
assy
:
Remove cap of connection box
:
Disconnect coil from rectifier board
by releasing both wires from
connector (5)
:
Remove coil from exteria pipe (4)
:
Place new coil in exteria pipe (4)
:
Connect both wires to connector on
rectifier board (5)
:
Replace cap of connection box
:
Replace cap (2)
:
Replace setting knob (1)
REPLACEMENT OF RECTIFIER BOARD
:
Remove cap of connection box.
:
Disconnect all electrical connections.
:
Remove selflocking nut in the center
of the board.
EN2R--9012 9412R0--NE
:
Remove the rectifier board
:
Place new board into the box
:
Replace selflocking nut
:
Reconnect all electrical connections
:
Replace cap of connection box
16