Honeywell VE4000 Series Instruction Sheet

VE4000 & VE5000 SERIES
APPLICATION
These series class A gas valves are used for control and
regulation of gaseous fluids in gas power burners, atmospheric
gas boilers, melting furnaces, incinerators and other gas
consuming appliances
GENERAL
DESCRIPTION
VE4000 Series Gas Valve
The VE series gas valves offer a series of functionalities:

Gas valves, Normally Closed.

CPI switch optional

Gas valves for use with Honeywell V4055, V4062 and
V9055 fluid power actuators.

Relief valves Normally Open.

Adjustable opening characteristics optional
FEATURES

The VExxxxX1xxx series gas valves have a wrench boss
as well on inlet side as on outlet side for pipe fitting
incorporated in the valve housing.

The VExxxxX3xxx and VE5xxxX3xxx series gas valves
are equipped at both sides with mounting holes to adapt a
pilot solenoid valve combination, to allow either internal or
external pilot gas. Furthermore these valves are equipped
with two M6 mounting holes to adapt an A4020A
electronic leak test The VExxxxB series gas valves have
an adjustable flow rate regulator on top of the coil.

For the VE series gas valves a series of field replaceable
connection boxes (including circuits) are available

The VExxxxC series gas valves have adjustments for step
pressure flow rate and opening speed in hydraulic damper
unit on top of the coil.

The VExxxxS series gas valves normally open relief
valves have no option for mounting a CPI switch

The VE5xxxX3xxx series gas valves can be equipped with
a wide range of Honeywell fluid power actuators. These
fluid power actuators are field replaceable.
1
Honeywell
CLASS "A" GAS VALVES
INSTRUCTION SHEET
ISTR0018 1602RA-NE