Remote Control; Maintenance - Dimplex Pro Engine series Operating Instructions Manual

Depending on how cold it is outside, this could mean the room is still cold when you have to get out of bed, or
mean that its been warm for half an hour before it needed to be. Adaptive Start means that if you select 21ºC
at 7am, the heater will turn on exactly when it needs to in order to meet this target, running for shorter periods
of time when the weather is mild, and ensuring the room is nice and warm in the winter.
The Adaptive Start function will automatically activate when you use the Timer Mode.

Remote Control

Display Screen
1
'Menu' Button
2
'Back' Button
3
'Advance' Button
4
'Up and Down' Arrows
5
'Enter' Button
6

Maintenance

GENERAL TIPS
Only use filtered tap water in this appliance.
Always ensure that the appliance is sitting on a level surface.
If you intend not using the appliance for longer than 2 weeks, remove and empty the sump and water tank.
Once installed, never move this appliance or lay on its back, without draining the water from sump and water
tank.
The appliance should never be operated if the lamps are not working.
The lamps should be regularly inspected as described under 'Changing lamps'.
FILLING THE WATER TANK
When the water tank is empty, the flame and smoke effect shuts off and you will hear 2 audible beeps, follow
these steps.
1. Press Switch 'A' to (0) (Fig.10)
2. Gently lift out the fuelbed and carefully set aside.
1
2
3
6
9
4
5