Specifications; Ec Declaration Of Conformity - Makita MLT100 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Blade diameter
Blade body thickness
Max. cutting capacities
No load speed (min
Table size (L x W)
Dimensions (L x W x H) with table(s) not extended
• Due to our continuing program of research and development, the specifications herein are subject to change with-
out notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
DOUBLE INSULATION
Wear safety glasses.
Do not place hand or fingers close to the
blade.
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of the European Directive,
on Waste Electric and Electronic
Equipment and its implementation in
accordance with national law, electric
equipment that have reached the end of
their life must be collected separately and
returned to an environmentally compatible
recycling facility.
Intended use
The tool is intended for cutting in wood.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Model
Arbor hole
90°
45°
-1
)
Net weight
Safety class
(for European countries)
30 mm
260 mm
93 mm
64 mm
(685 mm - 835 mm) x (955 mm
- 1,305 mm) with sub tables (R)
and (back)
726 mm x 984 mm x 333 mm
with sub tables (R) and (back)
34.1 kg
Noise
The typical A-weighted noise level determined accord-
ing to EN61029:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wear ear protection

EC Declaration of Conformity

For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and instruc-
tions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for
future reference.
ADDITIONAL SAFETY RULES FOR
TOOL
SAVE THESE INSTRUCTIONS.
1. Wear eye protection.
2. Do not use the tool in presence of flammable
liquids or gases.
NEVER use the tool with an abrasive cut-off
3.
wheel installed.
8 ENGLISH
MLT100
(for other than European
countries)
25 mm and 25.4 mm
255 mm
1.9 mm or less
90.5 mm
63 mm
4,300
(685 mm - 835 mm) x (955 mm
- 1,305 mm) with sub tables (R)
and (back)
726 mm x 984 mm x 333 mm
with sub tables (R) and (back)
34.1 kg
/II
) : 92 dB (A)
pA
) : 105 dB (A)
WA