Yealink SIP-T54S Manual page 8

Parameters
edk.edklist.X.enable
(X ranges from 1 to 255)
Description:
It enables or disables the Enhanced DSS Keys (EDK) macro X.
0-Disabled
1-Enabled
Note: It works only if the value of the parameter "features.enhanced_dss_keys.enable"
is set to 1 (Enabled).
edk.edklist.X.mname
(X ranges from 1 to 255)
Description:
It configures the unique identifier used by the soft key or DSS key configuration to
reference the enhanced DSS keys entry for macro X.
It cannot start with a digit. This parameter must have a value, it cannot be left blank.
Note: If there are two or more same macros, the soft key or DSS key will invoke the
macro with a smallest value of X. It works only if the value of the parameter
"features.enhanced_dss_keys.enable" is set to 1 (Enabled).
edk.edklist.X.action
(X ranges from 1 to 255)
Description:
It configures the action string that contains a macro definition of the action that the
softkey or DSS key performs.
This parameter must have a value, it cannot be left blank. For a list of macro definitions
and example macro string, refer to
Note: It works only if the value of the parameter "features.enhanced_dss_keys.enable"
is set to 1 (Enabled).
Enhanced DSS Keys (EDK) Prompt Parameters
edk.edkprompt.X.enable
(X ranges from 1 to 10)
Description:
It enables or disables the Enhanced DSS Keys (EDK) prompt X.
0-Disabled
1-Enabled
Using Enhanced DSS Keys on Yealink IP Phones
Permitted Values
0 or 1
String
String
Understanding Macro Action
0 or 1
Default
0
Blank
Blank
Strings.
0
8