Care And Maintenance; Storage And Transport; Shipping Your Instrument With A Battery; End Of Life Disposal - Bartington Mag-01 Operation Manual

Single axis fluxgate magnetometers with mag probes b-g

Hide thumbs Also See for Mag-01:

Table of Contents

7.3. Care and Maintenance

Note: Surface or dirt contamination should be removed using a mild detergent solution

only. If the connector pins become contaminated then they should be lightly cleaned with a

swab of isopropyl alcohol.

Your magnetometer is a precision electronic instrument and should be treated as such.

Note: Avoid exposing this instrument to shocks or continuous vibration.

Note: Store only within the temperature range as indicated in the product brochure.

Note: Do not expose this instrument to strong magnetic fields while being stored.

Batteries, and equipment containing batteries, should only be shipped in accordance with local

regulations. Refer to the IATA website (www.iata.org) for regulations regarding air transport.

Caution: If there is any doubt at all as to the integrity of a battery (for example, cracked or

dented casing) then it must not be shipped. Remove it from the equipment and dispose of it

according to local regulations.

When changing batteries in this equipment, ensure that the replacement battery is of the same

type as described in the product brochure.

This product should not be disposed of in domestic or municipal waste. For information about

disposing of your sensor safely, check local regulations for disposal of electrical / electronic

products.

This sensor complies fully with Restriction of the Use of Certain Hazardous Substances in

Electrical and Electronic Equipment (RoHS) and WEEE Regulations current at the time of

printing.

BARTINGTON INSTRUMENTS

Page 18 of 20

OM0382/9

Table of Contents

Mag-01h