Newage Pro 3.0 Series Assembly Instructions Manual page 9

Installing Corner Worktop
Parts Needed.
4x Lock Nut
(1/4")
4x # 8 x 5/8"
4x 1/4" x 5/8
screw
2x Support
Bracket
2 Attach top to one cabinet using 1/4" x
5/8 hex bolts, nuts, and washers.
4
Slide in corner and attach
remaining cabinets.
4x Washer
(1/4")
hex bolt
1x Corner
Worktop
Note: Ensure there is enough assembly
room. Cabinets must be assembled away
from corner to access backs of cabinets.
On adjacent edges attach 2 support
1
brackets to underside of corner top
using the supplied (4) 38 x 5/8" screws.
6"
or
4"
Important: For mounting top flush with back of
cabinet measure 6" in from corner, for mounting
top flush with front of cabinet measure 4" in from
corner and flush with edge.
3
Attach second cabinet to top.
X2
3
2
1
6"
1 2
or
4"
9
3