Newage Pro 3.0 Series Assembly Instructions Manual page 18

Hanging Cabinets on Wall
4 Hanging cabinets on wall.
A lign the top of the wall hanging brackets with the lines marked for
the position of the top of the cabinets(Step C) and attach
the brackets securely into the studs using the supplied
lag bolts and washers.
Note: It is possible to offset the bracket to one side or the other if the bracket
is positioned close to the edge of the intended cabinet position by using the
secondary hole positions on the bracket.
C
C
A
Height from Floor
Lift cabinet into place over the brackets and
5
flush with the wall, and lower into place.
18
(cont.)
Floor