Using The Base Station Telephone With Gigaset 1000 And 2000 Series Handsets - Siemens Gigaset 3035isdn Operating Instructions Manual

17 .5.00 Anhang.fm Gigaset3035isdn
Appendix
Using the base station telephone with Gigaset 1000
and 2000 series handsets
You can use handsets from the previous series with your base station tele-
phone. Prepare your base station telephone for registration as described be-
fore. The procedure on the handset is described in the operating instructions
for the relevant handset.
Please take note of the following restrictions:
1000S/2000S
Register No internal numbers
available
Dial No internal/external
display available
Hot key selection not available
Duration of call display only available locally
Cost display not available
Callback not available
Calling line identification pre- not available
sentation (CLIP)
Temporarily suppress caller not available
ID display
Accept call waiting available
Reject calls not available
Switch calls available
Keypad protocol not available
Three-party conference available
Parking not available
External enquiry call from available
external call
Accept external call waiting not available
in internal call
Call pickup available
Voice calling not available
Open listening not available
Check caller list not available
Differentiate ringing tones not available
For Comfort handset 2000C, 2000/3000 Pocket
No provider support,
No currency symbols,
Name replacement only during call phase, not in the
– caller list
– redial list
– answering machine recording list
144
A31008-G3035-B101-6-7619 Korrektur: 0
1000 C
No internal numbers
available
not available
only available locally
not available
not available
not available
not available
not available
not available
available
not available
not available
not available
available
not available
not available
not available
not available
not available
not available