Gigaset 3000 Classic Handset Operating Procedures; Procedures From Standby Mode; Procedures When Connection Established - Siemens Gigaset 3035isdn Operating Instructions Manual

17 .5.00 Anhang.fm Gigaset3035isdn
Appendix
Press the keys in the
specified order
If an answering machine is connected to the cordless TAE,
you should set the device type as "answering machine" .
This will enable you to pick up calls immediately from the
base station telephone or from a handset during recording.
Setting/
device type
Telephone
Fax/Modem
Neutral
Additional an-
swering ma-
chine
142
A31008-G3035-B101-6-7619 Korrektur: 0
Forwarding effect
Fax or modem calls are not transferred
to the TAE if the service ID is also trans-
mitted.
Only fax or modem calls are transferred
to the TAE if the service ID is also trans-
mitted.
All telephone calls as well as all fax and
modem calls are transferred to the TAE.
Use if no service ID is transferred.
During AB operation downstream of a
TAE, you can immediately pick up calls
at the base station telephone or hand-
set.
17 .5.00 Anhang.fm Gigaset3035isdn
Appendix

Gigaset 3000 Classic handset operating procedures

Procedures from standby mode

Activate temporary anonymous call
Unpark (xx = parking number)
Intercom
Room monitoring
Callback
Enter answering machine mode
Internal dialling
Collective call
Activate caller list

Procedures when connection established

Reject call waiting
Temp. keypad
Subscriber
(xx = Parking number)
Open listening
Callback
Three-party conference
Call waiting
Accept call waiting in internal call
Early pickup when ringer delayed
Indirect pickup of an answering machine call
End active subscriber during the enquiry call
Retrieve call on hold
Place call on hold
Place call on hold and make external
enquiry call
Toggle in enquiry call
Place call on hold and make internal
enquiry call
143
A31008-G3035-B101-6-7619 Korrektur: 0
xx
activate
activate
deactivate
... ,
deactivate
activate
park xx
unpark xx
activate
deactivate
activate
deactivate
start
end
accept
... ,