Warranty; Device Replacement; Disposal; Hotline - Siemens Gigaset 3035isdn Operating Instructions Manual

Isdn comfort telephone with integral answering machine extendable up to 6 handsets
Table of Contents

Advertisement

17 .5.00
rat.fm
Gigaset3035isdn
About your system

Warranty

Siemens AG guarantees this device for 6 months (Switzerland: 1 year), cal-
culated from the date of purchase from the dealer. Please retain your receipt
as proof of this date.
Within this warranty period, Siemens AG shall cover all material or manufac-
turing defects free of charge. Siemens AG shall, at its own discretion, fulfil
the warranty conditions either through repair or replacement of the defec-
tive device.
The warranty does not cover damage caused as a result of improper use,
normal wear and tear or tampering with the device. The warranty does not
cover consumable materials or any defects which only have a minor effect
on the value and functionality of the device.
Your Siemens product complies with the technical requirements for connec-
tion to the public telephone network.
Your warranty claims can be made directly to Siemens Service.

Device replacement

When replacing device components, the handset must be registered at the
base station telephone again.

Disposal

When your device has reached the end of its service life, please dispose of it
in an environmentally-friendly way in accordance with local regulations.

Hotline

If your device is faulty please contact the Siemens Service Hotline:
!
Germany:
0180 5333 222

Austria:
051707-5004
Switzerland:
012120090
For a repair under warranty, the faulty device must be ac-
companied by a completed and stamped warranty card.
In the event of a malfunction, please contact the dealer.
Gigaset 3035isdn is designed for operation in your country as indicated on the
underside of the unit. Special country-specific features have been implement-
ed. Your specialist dealer or network provider will be happy to answer any ques-
tions with regard to differences in public telephone networks.
The compliance of the unit with the basic requirements of the terminal direc-
tive is certified by the CE symbol.
128
A31008-G3035-B101-6-7619
Korrektur: 0
Monday to Friday
8.00–20.00
Saturday
9.00–14.00
17 .5.00
rat.fm
Gigaset3035isdn
The manufacturer declares, that the above mentioned product is manufactured
according to the Full Quality Assurance System with the registration number
"Q810820M" in compliance with ANNEX V of the R&TTE-Directive
99/05/EC. The presumption of conformity with the essential requirements
regarding Council Directive 99/05/EC is ensured.
The original declaration has been issued.

Troubleshooting

Symptom
Possible Cause
The handset is off the
The handset connector
hook, but no dial tone
or telephone connect-
can be heard.
ing cable are not insert-
There is a fault indicator
ed correctly.
in the display.
You cannot dial any
The long-distance code
call numbers.
has changed.
The telephone is
locked.
Telephone accounts
have been set up.
Call restriction is active.
There are no incoming
The handset was not re-
calls.
placed properly.
Call forwarding is set to
"permanent" .
No MSN assignment to
internal subscriber.
"Internal" access has
been set.
The telephone does
The ringer volume is set
not ring when a call
to "0" .
comes in.
A31008-G3035-B101-6-7619
Korrektur: 0
About your system
Solution
Check the connector,
see page 14.
Check the connections
of the NTBA.
Check and correct the
long-distance code, see
page 138.
Check the status dis-
plays, unlock phone if
necessary, see
page 81.
Enter the account PIN,
see page 55.
Deactivate, see
page 87.
Replace the handset.
Deactivate "perma-
nent" call forwarding,
see page 43.
Define receive MSN,
see page 98.
Change access, see
page 99.
Adjust the ringer vol-
ume, see page 69.
129

Advertisement

Table of Contents
loading

Table of Contents