Table of Contents
Advertisement
2 ViVOpayKiosk III Installation
This section provides information on how to install the ViVOpay Kiosk III on a kiosk.
2.1 Parts List
Verify that you have the following hardware for the installation of the ViVOpayKiosk III:
• ViVOpay Kiosk III Controller
• ViVOpay Kiosk III Antenna (either square or angle bezel)
• Antenna LED power and data cable
• ViVOpay Kiosk III to ECR/POS cable (customer supplied). This USB or serial cable varies
based on the host to be used.
• Drill Template for the antenna
Angle Bezel
A t
Square Bezel
ViVOpayKiosk III UserManual
Page8 of 18
Advertisement
Table of Contents
Need help?
Do you have a question about the Kiosk III and is the answer not in the manual?