Table of Contents
Advertisement
Front brake lever
Pull in the lever (1) towards the twistgrip to operate
the front brake. The system is hydraulically operated
and you just need to pull the lever gently.
The brake lever has a dial adjuster (2) for adjusting the
distance between lever and twistgrip on the
handlebar. To adjust it, keep lever (1) fully extended,
and turn dial adjuster (2), turning it in correspondence
of one of the four foreseen positions. Keep in mind
that the position no. 1 corresponds to the maximum
distance between the lever and the handgrip,
whereas position no. 4 corresponds to the minimum
distance.
Warning
Before using these controls, thoroughly read
instructions under "Moving off".
Warning
Set front brake lever when motorcycle is
stopped.
2
1
Fig. 91
139
Advertisement
Table of Contents
