Table of Contents
Advertisement
If you wish to connect a Bluetooth Navigator, the
1
connection procedure shall be completed on the
2
navigator, by selecting the connection with the
motorcycle Bluetooth control unit. In this case, during
the pairing procedure, the Navigator icon will flash in
the Bluetooth Setting Menu. When the Bluetooth
control unit is connected to the device, the icon stops
flashing and becomes steady ON.
If user does not complete the pairing procedure on
the Navigator within 90 seconds, pairing screen on
instrument panel will go out, and display will go back
4
to Bluetooth Setting Menu main screen.
As soon as the pairing is finished, the indication WAIT
is replaced by the name of the connected device: the
complete name will be scrolled and then only the first
characters will be displayed. Once the device is
paired, the display will automatically show the
Bluetooth Setting Menu main page.
Fig. 73
116
Advertisement
Table of Contents
