Authorisation; Specifications - Siemens Gigaset C450 User Manual

Authorisation

This device is intended for analogue
phone lines in your network.
Country-specific requirements have been
taken into consideration.
We, Siemens AG, declare that this device
meets the essential requirements and
other relevant regulations laid down in
Directive 1999/5/EC.
A copy of the 1999/5/EC Declaration of
Conformity is available at this Internet
address: http://www.siemens.com/
gigasetdocs.

Specifications

Recommended batteries
(Valid at the time of going to press)
Nickel-metal-hydride (NiMH):
u
Sanyo Twicell 650
u
Sanyo Twicell 700
u
Sanyo NiMH 800
u
Panasonic 700 mAh "for DECT"
u
GP 550mAh
u
GP 700mAh
u
GP 850mAh
u
Yuasa Technology AAA Phone 600
u
Yuasa Technology AAA Phone 700
u
Yuasa Technology AAA 800
u
VARTA Phone Power AAA 700mAh
The handset is supplied with two recom-
mended batteries.
Handset operating times/charging times
The following information relates to batteries
with a capacity of 650mAh.
Standby time approx 130hours (5days)
Calling time approx. 13hours
Charging time approx. 13hours
The operating and charging times apply only
when using the recommended batteries.
Base station power consumption
In standby mode: approx. 2W
During a call: approx. 3W
General specifications
DECT standard
GAP standard
No. of channels
Radio frequency
range
Duplex method
Channel grid
Bit rate
Modulation
Language code
Transmission power 10 mW, average power per
Range
Base station power
supply
Environmental con-
ditions for operation
Dialling mode
Flash time
Base station dimen-
sions
Handset dimensions 141 x 53 x 31mm
Base station weight
Weight of handset
with battery
27
Appendix
is supported
is supported
60 duplex channels
1880–1900 MHz
Time multiplex, 10 ms frame
length
1728 kHz
1152 kbit/s
GFSK
32 kbit/s
channel
up to 300 m outdoors,
up to 50 m indoors
230 V ~/50 Hz
+5 °C to +45 °C;
20 % to 75 % relative humidity
DTMF (tone dialling)/DP (dial
pulsing)
250 ms
102x 124 x 81mm
(L x W x H)
(L × W × H)
121 g
116 g