Making calls
– CLIP (Calling Line Identification Presenta-
tion): the caller's number is displayed
u
You have arranged CLIP with your network
provider.
u
The caller has arranged CLI with the network
provider.
Call display with CLIP/CLI
If the caller's number is stored in your directory,
you will see their name.
®
1
2
1234567890
§Menu
1 Ring icon
2 Number or name of caller
The following is displayed in place of the
number:
u
Call, if no number is transmitted.
External
u
Withheld, if the caller has withheld Calling
Line Identification.
u
, if the caller has not arranged
Unavailable
Calling Line Identification.
Handsfree operation
In handsfree mode, instead of holding the
handset to your ear you can put it down e.g. on
the table in front of you to allow others to par-
ticipate in the call.
Activating/deactivating handsfree
Activating while dialling
~ d
Enter the number and press the
handsfree key.
¤
You should inform your caller before you use
the handsfree function so that they know
someone else is listening.
Switching between earpiece and handsfree
mode
d
Press the handsfree key.
Switch handsfree on and off during a call .
If you wish to place the handset in the base sta-
tion during a call:
¤
d
Press and hold the handsfree key
while
placing the handset in the base station. If
d
handsfree key
does not light up, press the
key again.
For how to adjust the volume, see page 21.
Page 9