IN-COMMAND Lite Installation And Operation Manual page 19

7. To edit the text, press on the function text. A device rename
window will open. Press "OK" after completing text editing.
(The text box is Limited to 12 characters)
8. Once changes have been made, press the Save button at the
top of the page.
9. After the floor plan has been edited, the new floor plan settings
can be pushed to the DC/SP. Press "Set" Push Settings to DC
Menu".
10. After the new floor plan settings have been pushed to the DC/SP,
another device can retrieve edited floor plan by pressing the
"Load" button next to "Load DC Menu".
11. To go back to the default floor plan settings, press the "Load"
button next to " Load Default Menu ".
18