Related Manuals for IN-COMMAND NCS40T
Summary of Contents for IN-COMMAND NCS40T
- Page 1 ™ NCS40T Trailer Control and Monitoring system Installation and Operation Manual Patent # US 9,679,735...
- Page 3 Important Safety Information Read the iN-Command Manual, and these warnings and instructions carefully before using this product. Failure to follow the use instructions in this owner’s manual, or improper use of the Mobile Application, Display Commander and/or Body Control Module, could result in personal injury, including death.
-
Page 4: Table Of Contents
Packing List ................5 Installation and Mounting instruction ........6 Tools and Supplies .............6 Connecting to the Battery ...........6 Selecting the Mounting Location ........6 Mounting the NCS40T ............6 Mounting the BT Antenna ...........6 Wiring ..................7 Travel Lock out information .............8 Mobile Devices ................9 Pairing A Mobile Device ............10... -
Page 5: Introduction
(1) Control System • Thank You! Thank you for choosing iN-Command. We hope you will fi nd the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new NCS40T for maximum enjoyment. -
Page 6: Installation And Mounting Instruction
• Four ¼” lock nuts. • Connecting to the Battery • To prevent a short circuit, make all other connections on the NCS40T Wall for Reference before connecting the Trailer Battery Power Input Red wire ring terminal to the +12V battery post and the White wire ring terminal to the negative battery post. -
Page 7: Wiring
• Wiring #6. TRUCK POWER - (WHITE) #1 .RUNNING LIGHT OUT (BROWN L1) #5 . DC 12V ( YELLOW L2) #4 .HYD DOWN OUT (GREEN) #2 .RIGHT LIGHT OUT (GREEN L3) #4. EMPTY #3 .SOLDENOID POWER OUT (WHITE ) #3 .EMPTY #2 .TPMS POWER + (RED) #3. -
Page 8: Travel Lock Out Information
NCS40T • Travel Lock out information (Safety) iN∙Command ® Control Systems use travel-lock-out technology to disable any functions that are deemed unsafe when the vehicle is in motion. -
Page 9: Mobile Devices
Visit the Google Play and Apple App stores on your mobile device to download and use the iN-Command Trailer App. Only one device can be actively paired to the iN-Command Trailer Control System at a time. To use another device, the active device needs to shut down its iN-Command App to allow... -
Page 10: Pairing A Mobile Device
NCS40T • Pairing A Mobile Device Click " Pair " button to enter discovery mode.( Long press " Pair " button for 5-8 seconds to disconnect device.) POWER PAIR BUTTON PAIR INDICATOR INDICATOR • iOS Pairing Instructions 1. Enable "Bluetooth" in the system settings of the mobile device. - Page 11 NCS40T 3. The DC will be displayed on the mobile device list in the format 4. The mobile device now shows that the DC is connected. NCS40TXXXXX.
-
Page 12: Android Pairing Instructions
NCS40T • Android Pairing Instructions 3. Press Scan to start scanning for Unpaired devices. 1. From the App Home Page select 2. Select the "Bluetooth" tab Select the device by pressing it. settings. - Page 13 NCS40T 6. The mobile device will be displayed in 4. A Bluetooth pairing request will appear on the "Paired devices " list on the mobile the mobile device. 5. Press " Pair " on the mobile device. App.
-
Page 14: Passcode Protection
• App Confi guration The iN-Command Trailer App is confi gurable. The user can select which functions are populated on the home page. Select the Settings icon at the bottom of the home page, then press the Confi guration tab. The default confi guration is Battery, Hydraulic and Light... -
Page 15: Adding Auxiliary Function
• Adding Auxiliary Function The iN-Command Trailer App is confi gurable. The user can select which functions are populated on the home page. Select the Settings icon at the bottom of the home page, then press the Confi guration tab. The default confi guration is Battery, Hydraulic and Light... -
Page 16: Adding Tpms
• Adding TPMS If the user has iN-Command TPMS Sensors installed on the trailer, a TPMS icon can be added to the home page to provide a quick link to the iN- Command TPMS App. In the Settings page, select the Apps tab. Once in the App page, there is a selection for tires. There is an info icon that provides a descreption of the TPMS function and a link to the iN-Command TPMS App on the App store, if the user currently does not have the iN- Command TPMS App installed on their device. -
Page 17: Low Battery Voltage Alert
• Low Battery Voltage Alert The iN-Command Trailer App is equipped with a Low Voltage Alert. If the battery voltage drops below the setpoint for three minutes, a popup will appear notifying the user that the battery voltage is low. The Low Voltage Alert can be adjusted from 11.8V to 12.4V, or the alert can be turned off. -
Page 18: Home
NCS40T • Home Page Operation From the home page, you can check the battery voltage, operate the hydraulic lift, perform a light check on the trailer lights, operate the auxiliary function and check the TPMS sensors. • Battery Check To check the battery level, press the Battery icon on the home page. In the battery page, the voltage will be displayed and there is a bar graph to indicate the state of the battery. -
Page 19: Hydraulic
NCS40T • Hydraulic To perform the Hydraulic lift function, press the Hydraulic icon from the home page. The user will be prompeted with two Travel Lock Engaged popups. To proceed, make sure it is safe to proceed, then press Yes on the fi rst popup. The second popup will appear, press Yes again. Once in the Hydraulic page, the Travel Lock counter will start counting down from 60 seconds. -
Page 20: Light Check
NCS40T • Light Check To perform the Light Check, press the Light Check icon on the home page. The user will be prompeted with two Travel Lock Engaged popups. To proceed, make sure it is safe to proceed, then press Yes on the fi rst popup. The second popup will appear, press Yes again. Once in the Light Check page, the Travel Lock Counter will start counting down from 120 seconds. -
Page 21: Auxiliary
NCS40T • Auxiliary To perform an Auxiliary function, press the Auxiliary icon on the home page. The user will be prompeted with two Travel Lock Engaged popups. To proceed, make sure it is safe to proceed, then press Yes on the fi rst popup. The second popup will appear, press Yes again. Once in the Auxiliary page, the Travel Lock timer will start counting down from 60 seconds. -
Page 22: Tpms
To access the iN-Command TPMS App, press the Tire icon on the home page. The TPMS App will then launch. Please see the iN-Command TPMS manual for operation instructions. To go back to the iN-Command Trailer App, press the iN-Command App icon at the top left corner of the... -
Page 23: Troubleshooting
Symptom Solution • Check for a solid red light on top of the NCS40T. A solid red light indicates it is powered on. A fl ashing red light indicates it is in the boot up process. • Check for +12V on the charge line in the 7-way connector. -
Page 24: Specifi Catons
NCS40T • Specifi catons App Support iOS 10.0 and up, Android 6.0 and up. (1 device at a time) Button Bluetooth pairing button LEDs Power Status (boot status), Pairing Status Operation voltage 12 VDC Max curuent draw at 12 VDC / 650mA Dimension 228.3(W) x 150.8(H) x 33.0 (D) mm... -
Page 25: Fcc Notes
NCS40T • FCC NOTES IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. - Page 26 www.jensenrvdirect.com ©2015 ASA Electronics LLC 600-2100010-001...
Need help?
Do you have a question about the NCS40T and is the answer not in the manual?
Questions and answers