Siemens CRT Brochure page 147

Matrix Switching Systems
Accessories Matrix Switching Systems
Type
VC-ALARM VC-Alarm Visilynx 3 Alarm-Cable
Visilynx 3 alarm cable
Dimensions (W x H x D)
Weight
VC-PCCON VC-PCCON Visilynx 3 PCCON Cable
The PCCON cable is used to interface the Visilynx 3 to a PCCON control
device.
Dimensions (W x H x D)
Weight
VC-3CONFIG VC-3CONFIG Visilynx 3 Conf.-Cable
Weight
V3-QUAD Visilynx 3 Colour Quad-Module
Displays four‚ high-resolution colour pictures on a single Visilynx 3 vid-
eo output in real time‚ with each segment controllable from the Visilynx
keyboard as a separate monitor number. Will display the inputs in quad
format in a specified order‚ or any one input as full-screen. One or two
quad cards can be fitted in a Visilynx 3 Integrated System Unit (V3-ISU)‚
separate composite and S-Video outputs are available on the rear pan-
el. Each segment can be independently frozen. Time-base correction of
video inputs ensures high quality pictures without the need for external
camera synchronisation. Each picture segment is frozen when the
source input is switched‚ in both full-screen and quad mode‚ to prevent
picture roll. All the inputs have AGC to preserve clear images independ-
ent of differences in picture levels. Colour text insertion on the monitor
output. Self-test fault diagnostics.
Inputs
Outputs
Dimensions (W x H x D)
Weight
© Siemens Building Technologies Group
Length 1 m
0.24 kg
Length 1 m
0.18 kg
0.70 kg
4 from the 16 available from the
Visilynx Integrated System Unit.
Inputs time-base corrected and with
AGC.
Separate Composite and S-Video
outputs available. Will display 4
inputs in quad format in a specified
order‚ or any 1 input as full-screen.
Each segment can be independent-
ly frozen.
220 x 100 mm
3U Visilynx 3 Euro card
0.140 kg
Order No.
BPZ:80-230
BPZ:80-222
BPZ:80-227
BPZ:80-226
10
10-15