Accessories Video Transmission - Siemens CRT Brochure

Video Transmission

Accessories Video Transmission

Type
RS232-RS485
RS232-TTY
VGI200
VT/75
7-4
Converter RS232 to RS485
Converts RS232 interface signals to RS485 interface signals.
Weight
Converter RS232 to TTY
Converts RS232 interface signals to TTY interface signals.
Weight
Video Isolation Transformer
The VGI200 video isolation transformer breaks ground loops‚ only
allowing video and camera control signals through. Ground loops occur
when the earth potential at the camera is different from the potential
at the monitor. This difference may only be a small voltage but it can
cause large currents to flow through the shield of the coaxial cable.
These large currents will cause picture distortion and safety problems if
they remain.
Connections
Impedance
Housing
Weight
VT/75-75 Video Transformer 75R
Achieves groundloop isolation on a video cable‚ i.e. removes earth
loops. VT75-75 D 75 ohm coax in / 75 ohm coax out. Compatible with
'C' type telemetry.
Dimensions (H x W x D)
Weight
0.40 kg
0.37 kg
2 x BNC‚ in and out
75 Ohm
Plastic
0.227 kg
41 x 32 x 90 mm
0.20 kg
Order No.
2GF5505-8AH
2GF5505-8AG
GBQ:A5573460001
BPZ:80-236
© Siemens Building Technologies Group