Explosion-Proof Housings And Mounts; Explosion-Proof Housings - Siemens CRT Brochure

Explosion-Proof Housings and Mounts

Explosion-Proof Housings

Type
FH07C..
FH07C-30
FH07C-30/L
6-2
Phoenix Explosion-Proof Extruded Aluminium Camera Housings‚
ATEX Certified for IIC Applications
The "Phoenix Explosion-Proof" equipment is ATEX-certified to be used
in potentially hazardous areas where there is a risk of explosion
because flammable gases‚ vapours‚ mists or dusts may be present. The
housing is designed to prevent explosion by containing any heat‚
sparks‚ or flames generated. This prevents ignition of potentially explo-
sive atmospheres or materials outside the equipment. The housing is
ATEX-certified for use in IIC gas environments (includes hydrogen and
acetylene). The housing is supplied complete with heater & sun shield.
The housing can be factory fitted with a wiper and integral 10 or 17fn
AC Telemetry Receiver.
Siemens will deliver this housing only as a factory pre-built version with
Siemens or customer-supplied camera and lens. Therefore one of the
Phoenix-FIT options must be ordered.
Please note‚ that Siemens cannot supply ATEX IIC Equipment certifi-
cates unless one of the Phoenix-CERT options is ordered with each
housing.
Approval
Colour
Cable entry
Finish
Ambient temperature‚ storage
Heater rating
Protection rating
230 V AC ATEX IIC Explosion-Proof Housing
As FH07C.. for technical details‚ but with the following differences:
Power requirements
Usable volume (W x H x D)
Dimensions (W x H x D)
Weight
24 V AC ATEX IIC Explosion-Proof Housing
As FH07C.. for technical details‚ but with the following differences:
Power requirements
Usable volume (W x H x D)
Dimensions (W x H x D)
Weight
Certification to European ATEX
Directive 94/9/EC. Ex ii 2 GD (EExd
IIC T6)
Body: Polyester Powder Coat
RAL1020 (Yellow).
Endplates: Clear Anodised.
Sunshield: White Polyester Powder
Coat.
Internal Terminal Block‚ 4 off 20 mm
x 1.5
Aluminium extrusion (housing
body)‚ aluminium (end caps and
sunshield)
-20° C to +40° C
7 W nominal‚ 25 W max.
IP67 BS EN 60 529
230 V AC
114 x 94 x 290 mm
209 x 186 x 545 mm
10.0 kg
24 V AC
114 x 94 x 290 mm
209 x 186 x 545 mm
10.0 kg
Order No.
FH07C..
S24245-C4020-A10
S24245-C4020-A12
© Siemens Building Technologies Group