Operating The Speed Control; Optional Attachments - KitchenAid 5K45 Series Manual

USING THE STAND MIXER

OPERATING THE SPEED CONTROL

NOTE: The Stand Mixer may warm up during use. Under heavy loads with extended
mixing time, the top of the unit may become hot. This is normal.
Plug the Stand Mixer into a proper
electrical outlet. Always set speed
control lever on lowest speed to start,
1
then gradually increase speed to
avoid splashing ingredients. See the
"Speed control guide" chart.

OPTIONAL ATTACHMENTS

KitchenAid offers a wide range of optional attachments such as food grinders or
pasta makers. They may be attached to the Stand Mixer attachment power shaft,
as shown here.
To attach: Turn speed control
1
to "0". Unplug Stand Mixer.
Do not scrape the bowl while the
Stand Mixer is operating. The bowl
and beater are designed to provide
2
thorough mixing without frequent
scraping. Scraping the bowl once
or twice during mixing is usually
sufficient.
Loosen attachment knob by turning
2
it counterclockwise. Remove
attachment hub cover.
USING THE STAND MIXER | 17