Saving Settings - Siemens Gigaset SX541 WLAN dsl Manual

Please remember:
If you activate MAC access control, you must at least enter the PC from which you
are configuring the Gigaset SX541 WLAN dsl. Otherwise you will no longer be able
to access the user interface and a corresponding error message will be shown.
If, by mistake, you have denied all PCs access to the Gigaset SX541 WLAN dsl, you
have two choices:
u
You can completely reset the Gigaset SX541 WLAN dsl (see page 18).
u
You can connect a PC to the Gigaset SX541 WLAN dsl using one of the LAN
connections (by cable). As MAC access control only applies to PCs that are con-
nected "wirelessly", you can use this PC to change the configuration.
ì
To go to the next step, click Next >.

Saving Settings

On the next screen you conclude the wizard and save the settings. You will be informed
of any security risks that still exist.
ì
Click Finish to conclude the wizard.
The settings will now be active on your Gigaset SX541 WLAN dsl.
Please remember:
You must now configure WEP or WPA key for your PC's wireless network adapter if this
has been configured with other values. Once you have done this, you can log in again
wirelessly to your Gigaset SX541 WLAN dsl.
Security Settings
67