Siemens Gigaset SX541 WLAN dsl Manual page 44

Configuring the Local Network
ì
Open the IP Address tab.
ì
If Obtain IP address automatically has already been activated, your PC is already
configured for DHCP. Click Cancel and close the following windows with OK to start
your network configuration.
You may be prompted to insert your Windows Installation CD. Follow the instruc-
tions in the installation procedure.
Once the copying procedure is completed, you will be prompted to reboot your sys-
tem.
ì
Click Yes. The PC will then be rebooted.
Then read on from page 45.
ì
If Obtain IP address automatically has not been activated, activate this option
now.
ì
Open the Gateway tab and remove any entries in the Installed gateways list.
42