Synchronising Tcp/Ip Settings With The Gigaset Sx541 Wlan Dsl - Siemens Gigaset SX541 WLAN dsl Manual

Synchronising TCP/IP Settings with the Gigaset SX541 WLAN dsl

You have now configured your PC so that it is ready to be connected to the Gigaset
SX541 WLAN dsl. You now have to release the old TCP/IP settings and synchronise them
with the settings of your Gigaset SX541 WLAN dsl.
ì
Click Start on the Windows Desktop and then Programs, followed by Accessories
and finally Command prompt.
ì
In the Command prompt window, enter the ipconfig
/release command and press the ENTER key.
ì
Then enter the ipconfig /renew command and press the ENTER key.
If the default IP address (192.168.2.1) of the Gigaset SX541 WLAN dsl was not
changed, the IP address should now read 192.168.2.x (with x being a number
between 2 and 255). The Subnet Mask must always be 255.255.255.0 and the
Standard Gateway must have the IP address of the Gigaset SX541 WLAN dsl
(192.168.2.1). These values confirm that your Gigaset SX541 WLAN dsl is working.
ì
Enter exit and press the Enter key to close the Command prompt window.
Configuring the Local Network
29