Siemens Gigaset SX541 WLAN dsl Manual page 67

Manual key entry
ì
Select the Key type, Hex or ASCII.
If you select Hex, you can use the characters 0 to 9 and A to F.
.
– With a 64-bit encryption depth, the key is exactly 10 characters long.
– With a 128-bit encryption depth, the key is exactly 26 characters long.
If you select ASCII you can use the characters 0 to 9, A to Z and a to z plus the special
characters in the ASCII character set.
– With a 64-bit encryption depth, the key is exactly 5 characters long.
– With a 128-bit encryption depth, the key is exactly 13 characters long.
ì
Confirm the key by entering it again in the Confirm key field.
Generating the key by means of a Passphrase
ì
Enter a Passphrase (up to 32 characters) and confirm it by entering it again. The key
is generated automatically.
Please remember:
u
It is very important that you make a note of the key or passphrase. You will need
this information to configure the wireless network adapters properly.
u
When you have concluded the Security Setup Wizard, you must change the WEP
encryption on the wireless network adapters for the connected PCs in the same
way as they will not otherwise be given access to the Gigaset SX541 WLAN dsl's
wireless network.
ì
To go to the next step in the Security Setup Wizard, click Next >.
Security Settings
65