Siemens Gigaset SX541 WLAN dsl Manual page 169

Wlan dsl
Table of Contents

Advertisement

Glossary
Glossary
Access Point
An Access Point, such as the Gigaset SX541 WLAN dsl, is the centre of a wireless local
network (WLAN). It handles the connection of the wireless linked network components
and regulates the data traffic in the wireless network. The Access Point also serves as an
interface to other networks, for example an existing
Ethernet
LAN or via a modem to the
Internet. The operating mode of wireless networks with an Access Point is called
Infrastructure
mode.
Ad-hoc mode
Ad-hoc mode describes wireless local networks (WLANs) in which the network compo-
nents set up a spontaneous network without an
Access Point
for example several Note-
books in a conference. All the network components are peers. They must have a wire-
less
Network
adapter.
Auto Connect
Auto Connect means that applications such as Web browser, Messenger and Email
automatically open an
Internet
connection when they are launched. This can lead to
high charges if you are not using
Flat
rate. This function can be deactivated at the
Gigaset SX541 WLAN dsl to save call charges.
Bridge
A Bridge connects several network segments to form a joint network, for example to
make a
TCP/IP
network. The segments can have different physical characteristics, for
example different connections such as
Ethernet
and wireless LANs. Linking individual
segments via Bridges allows local networks of practically unlimited size.
See also: Switch, Hub, Router,
Gateway
Broadcast
A Broadcast is a data packet not directed to a particular recipient but to all the network
components in the network. The Gigaset SX541 WLAN dsl does not pass broadcast pack-
ets on; they always remain within the local network (LAN) it administers.
BSSID
Basic Service Set ID
BSSID permits unique differentiation of one wireless network (WLAN) from another. In
Infrastructure mode,
the BSSID is the
MAC address
of the
Access Point.
In wireless net-
works in
Ad-hoc mode
the BSSID is the MAC address of any one of the participants.
Client
A Client is an application that requests a service from a Server. For example, an http Cli-
ent on a PC in a local network requests data, i.e. Web pages from an HTTP Server on the
Internet. Frequently the network component (for example the PC) on which the Client
application is running is also called a Client.
167

Advertisement

Table of Contents
loading

Table of Contents