Atlas Copco GA 30+ Instruction Book page 116

Unit settings
All unit settings can be displayed or hidden. Put a check mark in front of each point of interest and it will
be displayed. Only the machine status is fixed and can not be removed from the main screen.
Analog inputs
Lists all current analog input values. The measurement units can be changed in the preference button from
the navigation menu.
Counters
Lists all current counter values from controller and unit.
Info status
Machine status is always shown on the web interface.
Digital inputs
Lists all digital inputs and their status.
Digital outputs
Lists all digital outputs and their status.
114
Instruction book
2920 7180 30