Siemens SIMATIC TIWAY 1 User Manual page 45

OPERATION AND APPLICATION
2.10.4 Setting Up A Macro
Figure 2–16 flowcharts the steps for setting up macros. Commands for checking
available memory are not included in the flowchart, but are described in the
sections that follow.
(START)
Allocate A
Source ID
Allocate A
Macro Buffer
Define the Macro
More Macros
for the same
source?
No
(END)
Figure 2–16 Macro Setup Procedure
2–35
Yes
UNILINK HOST ADAPTER
USER MANUAL