Table of Contents
Advertisement
Description
Terminal box
The terminal box contains terminals for the main circuit and auxiliary circuit (excitation) and
for other auxiliary circuits. The terminal box fulfills degree of protection IP55.
The screw-mounted entry plate is not normally supplied with holes. This enables you to adapt
the type, number, and size of the screw connections to the specific cabling requirements.
If a separate wiring space is prescribed for specific auxiliary circuits, an additional auxiliary
terminal box is mounted on the side of the terminal box.
Rolling-contact bearing
The rolling-contact bearing is normally a floating bearing at the drive end and a locating bearing
at the non-drive end. You will find further information in section "Spare parts (Page 99)."
On machines with a regreasing device, the lubricant plate specifies the types of rolling-contact
bearing fitted.
22
SIMOTICS DC 1GH5
Operating Instructions 02/2016
Hide quick links:
Advertisement
Table of Contents
