Description - Siemens SIMOTICS DC 1GH5 Operating And Installation Instructions

Description

Applications
DC machine of the 1GH5... series are implemented with open-circuit or closed-circuit cooling
with a laminated stator yoke.
They are designed for a wide range of drive and energy conversion applications and comply
with the harmonized standards of series IEC / EN 60034 (VDE 0530).
Risk of explosion
This machine is not designed for use in hazardous areas. An explosion can occur if the
machine is operated in these areas. This can result in death, serious injury or material damage.
Never operate this machine in hazardous areas.
Schematic diagram
Image 3-1
Cooling
The forced-ventilated machine is open-circuit-ventilated with cooling method IC 17, with pipe
connections on both sides with cooling method IC 37. The external fan is connected to the
machine via a pipe. The fan and cooling pipe are not included in the scope of supply.
SIMOTICS DC 1GH5
Operating Instructions 02/2016
WARNING
Block diagram of motor type 1GH...
3
19