Safety - Power Probe IV User Manual

Power Probe IV
To avoid possible electric shock or personal injury and to avoid damage to the Power Probe or
item being tested, please use the Power Probe according to the following safety procedures:
• Power Probe recommends reading this manual before using the Power Probe IV.
• This product is designed to be powered from DC power sources such as found in Automo-
tive, Small Craft Marine and Small Craft Aviation electrical systems and will be damaged if
connected to line voltage such as 115V AC power sources or 24V AC Control circuits.
• Do not connect to electrical system with higher than rated voltage specified in this manual.
• Do not test voltage exceeding the rated voltage on the Power Probe IV.
• When testing voltage exceeding 30V AC RMS, 42V AC Peak, or 60V DC, be particularly
careful to avoid any electric shock.
• Check the Probe IV case for cracks or damage. Damage to the case can leak high voltage
causing a potential electrocution risk.
• Check the Probe IV cables for any insulation damage or bare wires. If damaged, do not use
the tool, please contact Power Probe Technical support.
• Use only shrouded leads and accessories authorized by Power Probe to minimize exposed
conductive electrical connections to eliminate shock hazard.
• Do not open the Power Probe IV, no serviceable parts are inside. Opening the Power Probe
IV voids the warranty. All repairs should only be performed by authorized Power Probe ser-
vice centers.
• When maintaining the Power Probe, use only replacement parts specified by the manufac-
turer.
• Use only in well ventilated areas. Do not operate around flammable materials, vapor or
dust.
• Be careful when energizing components that have moving parts, assemblies containing mo-
tors or high powered solenoids.
• Power Probe, Inc. shall not be liable for damage to vehicles or components caused by mis-
use.
• Power Probe, Inc. shall not be held liable for any harm caused by unintentional or intentional
misuse of our products or tools.
• If you have any questions please go to our website www.powerprobe.com or contact Pow-
er Probe's Technical Support: 800-655-3585.
CAUTION - PLEASE READ
www.powerprobe.com · 800-655-3585
Page 3

Safety