Table of Contents
Advertisement
U2701A/U2702A USB Modular Oscilloscopes User's Guide
To configure Manual marker
The Manual marker function allows you to manually place
indicators on the waveforms displayed on the graph to show the
selected measurements.
1 Obtain and establish a stable signal on the waveform
acquisition graph.
2 Click on the Measurements & Cursors button and select
Manual at the Markers property. The Cursors panel will be
activated once Manual is selected.
3 Select Channel 1 or Channel 2 as desired. Then select X
Cursors or Y Cursors to define the measurements you would
like to perform.
4 Use the navigation arrows to adjust the cursors position.
To adjust the first cursor (X1 or Y1), left- click and drag the
cursor on the graph.
To adjust the second cursor (X2 or Y2), right- click and drag
the cursor on the graph. Delta measurements of the Cursors
can be obtained on the Cursors panel.
Scope Features and Functions
2
53
Advertisement
Table of Contents
