Table of Contents
Advertisement
N O TE
U2701A/U2702A USB Modular Oscilloscopes User's Guide
Table 2-2 Edge Trigger menu
Edge Trigger Panel Controls
Coupling
LF-Reject
HF-Reject
To configure edge triggering
1 Select the desired trigger source on the trigger source panel.
2 On the Trigger Settings panel, click on the Edge button.
3 Select the trigger level by adjusting the knob or by clicking on
or
.
4 Enter the desired holdoff time and unit, then click on Set to
proceed.
5 Select the desired slope on the Edge Trigger Settings panel.
• To trigger both edges of a clock, use Alternating edge mode.
• To trigger on any activity of a selected source, use Either edge mode.
Scope Features and Functions
Sets the input coupling to low frequency reject
Sets the input coupling to high frequency reject
2
43
Advertisement
Table of Contents
