Agilent Technologies U2701A User Manual page 33

U2701A/U2702A USB Modular Oscilloscopes User's Guide
9 For modules other than the U2300A Series, U2500A Series,
U2600A Series, and the U2781A the system will perform a
firmware version check on your connected module.
a If the module firmware version is the same as the installed
version on the PC, it will not perform any firmware
download and the modular product is now ready for use.
b If the module firmware version differs from the installed
version on the PC, the following message box will appear.
The model number and firmware versions shown on the
message box may vary depending on the module
connected to your PC.
c Click Yes to begin the firmware download. The following
message box will appear indicating the download in
progress. Image may vary depending on the module
connected to your PC. The model number shown on the
message box may vary depending on the module
connected to your PC.
Ensure that you do not remove the USB and power connection until the
N O TE
firmware download has completed.
d Your modular product is ready for use once the firmware
upgrade has completed.
Getting Started 1
17