Metso VALVCON QX Series Installation Maintenance And Operating Instructions
Hide thumbs
Also See for VALVCON QX Series:
Related Manuals for Metso VALVCON QX Series
Summary of Contents for Metso VALVCON QX Series
- Page 1 VALVCON® QX-Series ELECTRIC ACTUATORS Installation, Maintenance and Operating Instructions...
-
Page 2: Table Of Contents
These instructions provide information about safe handling and operation of the actuator. If you require additional assistance, please contact the manufacturer or manufacturer’s representative. Addresses and phone numbers are printed on the back cover. See also www.metso.com/electricactuators for the latest documentation. SAVE THESE INSTRUCTIONS! Subject to change without notice. -
Page 3: General
CLASS II, DIV I, GR. E, F & G; CLASS III. WARNING: DO NOT OPEN WHILE ENERGIZED OR WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT METSO AUTOMATION 44 BOWDITCH DRIVE SHREWSBURY, MA 01545 USA 1-508-595-5083 If the actuator(s) will be stored for a period longer than 90 days, follow the recommendations in IMO-S2 to maintain the actuator’s integrity. -
Page 4: Operation
IMO-I3000 EN OPERATION an end-of-travel switch, power and the “control signal” may be removed or left applied without damaging the actuator. The actuator includes two auxiliary limit switches that maybe 3.2.1 QX-Series Operation used for position indication or for interlocking other devices. 3.2.2 Wiring WARNING... -
Page 5: Adjustment Of End-Of-Travel
IMO-I3000 EN for any damage, scratches, or dents. Damage, scratches, or WARNING dents that will not fit completely in a circle having a diameter of 1/64” will void hazardous location certifications. If such ACTUATORS SHOULD BE PROPERLY GROUNDED AND WIRED IN imperfections are present the damaged enclosure part(s) ACCORDANCE WITH LOCAL ELECTRICAL CODE;... -
Page 6: Mounting The Actuator
IMO-I3000 EN shielding plate (about one inch larger than the actuator upward position before the motor is re-engaged. Rotate the in each dimension, and at least a 1/16” thick) should be shaft slightly to align the spur gears until the shaft ”springs” back to its re-engaged position. -
Page 7: Option Codes "Y1", "Y2", And "Y3" - Keyed Output
IMO-I3000 EN Duty Cycle and Motor Protection Option Codes “Y1”, “Y2”, and “Y3” - Keyed Output The actuator is equipped with an ISO 5211 compliant QX-Series actuators are equipped with a brushed DC motor mounting configuration. The standard drive output for and are rated for 80% duty cycle operation in environments 150-600 lb-in models is a 3/4”... -
Page 8: Warranty
Required quantity. whichever comes first. To request a Return Authorization for an actuator within the warranty period, please consult your local Metso distributor. Repair Service/Spare Parts We recommend that electric actuators be directed to our Northeast Service Center for maintenance. The Service... -
Page 9: Specifications & Technical Information
IMO-I3000 EN SPECIFICATIONS & TECHNICAL INFORMATION Table 1 - Specifications Temperature Range -40°F to 150°F (-40°C to 65°C). Conduit Connections (2) 3/4” NPT all sizes (3/4” to 1/2” reducing bushings included). 150 to 600 in-lbs: ISO 5211 F05 and F07 bolt circles, 3/4” female square; see “Dimensions” section and “How to Order “ table for additional output options. -
Page 10: Dimensions
IMO-I3000 EN 10.1 DIMENSIONS QX-SERIES ENCLOSURES (150-600 LB-IN) Mounting Flange, ISO 5211 F05 / F07 Actuator Size Drive Option Drive Type Drive Size Depth 150-600 lb-in (12-50 lb-ft; 17-68 Nm) Standard Square 0.750 (19mm) 0.90 (22.9mm) 150-600 lb-in (12-50 lb-ft; 17-68 Nm) Option "I1"... -
Page 11: Qx-Series Actuators By Model Number
IMO-I3000 EN 10.2 QX-SERIES ACTUATORS BY MODEL NUMBER How To Order - QX-Series Electric Actuators Actuator Series Enclosure Type Torque Other Options (if desired) Operating Voltage Order Order Code Order Code Description Description Order Code Description Code (see note 1) (see note 2) Weathertight &... -
Page 12: Additional Actuator Products And Accessories From Metso
IMO-I3000 EN ADDITIONAL ACTUATOR PRODUCTS AND ACCESSORIES FROM METSO ADC-Series • Available Options: Modulating Control Board, Speed Control/ Timer Board, Iso/Readback Board, extra limit switches, • Universal Control Board for On/Off and Modulating heater/thermostats, motor brake, feedback potentiometer, applications metric and “keyed” female outputs and handwheel override •...