JVC KD-DB902BT Instruction Manual page 37

TROUBLESHOOTING
Symptom Remedy
The iPod/iPhone does not • Check the connection between this unit and iPod/iPhone.
turn on or does not work. • Disconnect and reset the iPod/iPhone using hard reset.
"LOADING" appears when This unit is still preparing the iPod/iPhone music list. It
you enter search mode by may take some time to load, try again later.
pressing .
"NO DISC" Insert a playable disc into the loading slot.
"NO DEVICE" Connect a device (USB/iPod/iPhone), and change the
source to USB/iPod/iPhone again.
• Sound cannot be heard • Reconnect the Android device.
during playback. • Launch any media player application on the Android
• Sound output only from device and start playback.
• Relaunch the current media player application or use
the Android device.
another media player application.
• Restart the Android device.
• If this does not solve the problem, the connected Android
device is unable to route the audio signal to unit.
(Page 28)
• If USB connection does not work, connect the Android
device via Bluetooth or through auxiliary input jack.
"NO DEVICE" or "READING" • Reconnect the Android device.
keeps flashing. • If USB connection does not work, connect the Android
device via Bluetooth or through auxiliary input jack.
Playback is intermittent or Turn off the power saving mode on the Android device.
sound skips.
"CANNOT PLAY" • Make sure Android device contains playable audio files.
• Reconnect the Android device.
• Restart the Android device.
Symptom Remedy
"DISCONNECTED" USB is disconnected from the head unit. Please make sure
the device is connected properly through USB.
"CONNECTING" • Connected via USB input terminal: The device is connecting
to the head unit. Please wait.
• Connected via Bluetooth: The Bluetooth is disconnected.
Please check Bluetooth connection and make sure both the
device and unit are paired and connected.
"CHECK APP" The Spotify application is not connected properly or user is
not login. End the Spotify application and restart. Then, log
in to your Spotify account.
No Bluetooth device is • Search from the Bluetooth device again.
detected. • Reset the unit. (Page 3)
Pairing cannot be made. • Make sure you have entered the same PIN code to both the
unit and Bluetooth device.
• Delete pairing information from both the unit and the
Bluetooth device, then perform pairing again. (Page 13)
Echo or noise is • Adjust the microphone unit's position. (Page 13)
heard during a phone • Check the [ECHO CANCEL] setting. (Page 15)
conversation.
Phone sound quality • Reduce the distance between the unit and the Bluetooth
is poor. device.
• Move the car to a place where you can get a better signal
reception.
Voice calling method is • Use voice calling method in a more quiet environment.
not successful. • Reduce the distance from the microphone when you speak
the name.
• Make sure the same voice as the registered voice tag is used.
31
ENGLISH