JVC KD-DB902BT Instruction Manual page 25

BLUETOOTH®
Settings to use JVC Remote application
JVC Remote application is designed to control the JVC car receiver's
operations from iPhone/iPod (via Bluetooth or via USB input terminal) or
Android smartphone (via Bluetooth).
Preparation:
• Install the latest version of JVC Remote application on your device before
connecting.
• For more information, visit <http://www.jvc.net/cs/car/>.
1
Press and hold .
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected or activated.
4
Press to exit.
To return to the previous setting item, press
[REMOTE APP]
[SELECT] Selects the device (IOS or ANDROID) to use the application.
[IOS] [YES]: Selects iPhone/iPod to use the application via Bluetooth or connected
via USB input terminal. ; [NO]: Cancels.
If IOS is selected, select iPod BT source (or iPod USB source if your iPhone/iPod
is connected via USB input terminal) to activate the application.
• The connectivity of the application will be interrupted or disconnected if:
– You change from iPod BT source to any playback source connected via
the USB input terminal.
– You change from iPod USB source to iPod BT source.
[ANDROID] [YES]: Selects Android smartphone to use the application via Bluetooth. ;
[NO]: Cancels.
[ANDROID LIST]* Selects the Android smartphone to use from the list.
[STATUS]
* Displayed only when [ANDROID] of [SELECT] is set to [YES].
You can listen to the songs on the iPhone/iPod via Bluetooth on this unit.
Press B SRC repeatedly to select iPod BT.
.
• You can operate the iPod/iPhone in the same way as iPod/iPhone via USB
Default: [XX]
• If you plug in an iPhone/iPod to the USB input terminal while listening to
Shows the status of the selected device.
[IOS CONNECTED]: You are able to use the application using the iPhone/
iPod connected via Bluetooth or USB input terminal.
[IOS NOT CONNECTED]: No IOS device is connected to use the application.
[ANDROID CONNECTED]: You are able to use the application using the
Android smartphone connected via Bluetooth.
[ANDROID NOT CONNECTED]: No Android device is connected to use the
application.
Listen to iPhone/iPod via Bluetooth
input terminal. (Page 9)
iPod BT source, the source automatically changes to iPod USB. Press B SRC
to select iPod BT source if the device is still connected via Bluetooth.
19
ENGLISH