JVC KD-DB902BT Instruction Manual page 24

BLUETOOTH®
After pairing is done successfully, "PAIRING OK"
and Bluetooth compatibility check starts.
If "CONNECT NOW USING PHONE" appears, operate the Bluetooth device to
allow phonebook access to continue.
"TESTING" flashes on the display.
The connectivity result flashes on the display.
"PAIRING OK" and/or "HANDS-FREE OK"*1 and/or "AUD.STREAM OK"*2 and/
or "PBAP OK"*3: Compatible
*1 Compatible with Hands-Free Profile (HFP)
*2 Compatible with Advanced Audio Distribution Profile (A2DP)
*3 Compatible with Phonebook Access profile (PBAP)
After 30 seconds, "PAIRING DELETED" appears to indicate that pairing has
been deleted, and the unit exits check mode.
• To cancel, press and hold B SRC to turn off the power, then turn on the
power again.
BLUETOOTH — Audio
While in BT AUDIO source, you can connect to five Bluetooth audio devices
and switch between these five devices.
18
ENGLISH
"Device Name" appears
1
2
To
Play back/pause
Select group or folder
Reverse skip/Forward skip
Reverse/Fast-forward
Repeat play
Random play
Select a file from a folder/
list
Switch between
connected Bluetooth
audio devices
* Pressing the "Play" key on the connected device itself also causes switching of sound output
Operations and display indications may differ according to their availability
on the connected device.
Audio player via Bluetooth
Press B SRC repeatedly to select BT AUDIO.
Operate the audio player via Bluetooth to start playback.
On the faceplate
Press the volume knob.
Press 2 J / 1 K.
Press S / T.
Press and hold S / T.
Press 4 B repeatedly.
[TRACK REPEAT], [ALL REPEAT], [REPEAT OFF]
Press 3 A repeatedly.
[GROUP RANDOM], [ALL RANDOM], [RANDOM OFF]
Refer to "Select a file from a folder/list" on
page 11.
Press 5.*
from the device.