Esd-Sensitive Components; Figure 1-1 Esd Protective Measures - Siemens 1PH728 Operating Instructions Manual

Safety information

1.4 ESD-sensitive components

1.4 ESD-sensitive components
ESD guidelines
CAUTION
Electrostatic discharge
Electronic modules contain components that can be destroyed by electrostatic discharge.
These modules can be easily destroyed by improper handling.
To protect your equipment against damage, follow the instructions given below.
● Never touch electronic modules unless absolutely necessary in the course of
● If the modules have to be touched, the body of the person concerned must be
● Electronic modules should not be brought into contact with electrically insulating materials
● Always place electrostatic endangered assemblies on conductive bases.
● Always store and transport electronic modules or components in conductive packaging
Note
If the modules are to be stored and/or transported in non-conducting packings anyway,
they must be wrapped in conducting materials before doing so. Always use suitable
material for this purpose, for example, conductive foam rubber or household aluminum
foil.
The necessary ESD protective measures for electrostatically sensitive devices are illustrated
once again in the following drawings:
Figure 1-1
10
maintenance and repair procedures.
electrostatically discharged immediately beforehand and be grounded.
such as plastic foil, plastic parts, insulating table supports or clothing made of synthetic
fibers.
(e.g. metallized plastic or metal containers).
d
b
e e
c
a
(1)
ESD protective measures
d
f f
c
a a
(2)
d
b
e
f f
c
(3)
Siemens AG Operating Instructions 2.02 1PH728
f
a
A5E00177602A AD