Man D 2866 LUE 605 Repair Manual page 66

Removing and installing / Repairing Oil Pump
Checking the axial clearance of the
pump wheels
Fig. 9
Attach a dial gauge, push the shaft in one direction
up to the stop and set the dial gauge to "0".
Push the shaft in the opposite direction and read
off the needle deflection on the dial gauge.
9
Installing oil pump
Fig. 10
Before installing, check whether the oil pumps runs
smoothly and then fit them free of tension.
Fit oil suction line with seal in a tension-free man-
ner.
Screw on pressure-relief valve without seal.
Tighten the securing bolts with the prescribed tor-
que.
10
Fig. 11
Before installing the oil pan, crank the engine to
check whether the crank gear and the oil pumps
run unimpeded and smoothly.
Fitting the oil pan
Fill up the engine oil. Check oil level. Check the oil
pan for leaks
11
64